About the Cold Stabilization and limitations of I-T Diagram?

Cold Stabilization:

• It is a type of temperature cycle process, In this process without affecting the temperature it can relive the internal stress.
• At this process, the austenite which is retained is converted into martensite at a subatmospheric temperature in the material.
• This Cold Stabilization is adopted due to the excess removing of salt or ester.
• The manufacturing cost is reduced due to the energy required for processing is less.

I-T Diagram:

• This diagram is used for the time determination, In different temperatures the transformation of one phase to another phase Isothermally.

Limitations of cold stabilization:

• Under continuous cooling, it cannot prediction directly of accurate Transformation.
• For only samples of a single group, it is used.
• By the use of isothermal nose, the error may occur at the cooling rate.
• For only single Isothermal temperature it is applied

Please Subscribe! and Don't forget to Follow us on Facebook, Twitter, Linkedin, Instagram and Google Plus.